[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

U.S.ROBOTICS problem in FC4 & suse10


I bought a new U.S.ROBOTICS Message modem 5668B.
First i tried to install it on FC4 but it could not
recognize the modem.
Then i tried to install it on SUSE10 and it is
The problem is when i start dialing and getting the
connection which will stay for about 2 min then the
connection will get lost.
Here is the Kinternet log,

SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT3660011
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT3660011
pppd[0]: CONNECT 9600/ARQ/V34/LAPM/V42BIS
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: ~[7f]}#@!}!} } }$}-o~~[7f]}#@!}!}=}
pppd[0]: --> PPP negotiation detected.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 <--> /dev/ttyUSB0
pppd[0]: Serial line is looped back.
pppd[0]: Connection terminated.
Status is: disconnecting
Status is: disconnected
pppd[0] died: Loopback detected (exit code 17

Also I tried to use kppp in suse10 but unfortunately
it did not work.
As i tried to configure the modem using kppp but it
failed with message
"Unable to create modem lock file" 
It seems that kppp can not detect the modem ,also i
tried most of the options 
in kppp but no avail.

Please help......

Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around